+- ECU WORKER - Automotive Tuning (https://ecuworker.com)
+-- Forum: ECU WORKER FORUM (https://ecuworker.com/forumdisplay.php?fid=1)
+--- Forum: Software Request (https://ecuworker.com/forumdisplay.php?fid=41)
+--- Thread: DTC remover that works with ME7.1.1 8E0909559e (/showthread.php?tid=1114)
DTC remover that works with ME7.1.1 8E0909559e - thatguyrockz - 02-24-2020
Need software to remove DTC's for my audi a4 8E0909559e ecu me7.1.1
RE: DTC remover that works with ME7.1.1 8E0909559e - WEBMASTER - 02-24-2020
upload the file sir
RE: DTC remover that works with ME7.1.1 8E0909559e - thatguyrockz - 02-24-2020
Check engine still persists with stock and I don't have any money to fix right now. This is only temporary. I'm looking for any software that can help me remove dtc's because it looks like everyday a new one comes up do to intermittent short to ground. I need my NYS inspection instead of buying new parts I am paying for tickets!! any help would be appreciated. If there is no scriptkidddie Software ill have to run the car and come back with my DTC's
also Where is a good place to start learning to remove DTC's ? Ive read about winols damos hptuner and it all seems like a foreign language.
file is not .zip changed extension to upload.
RE: DTC remover that works with ME7.1.1 8E0909559e - thatguyrockz - 02-25-2020
(02-24-2020, 10:10 AM)WEBMASTER Wrote: upload the file sir
I read that changing the extension may change file I am not sure so I compressed it. I'm getting these codes at the moment.
Code:
18010 - Power Supply Terminal 30: Voltage too Low
P1602 - 002 - Lower Limit Exceeded - Intermittent
18032 - Shareware Version. To Decode all DTCs
P1624 - 008 - Please Register/Activate
16684 - Shareware Version. To Decode all DTCs
P0300 - 002 - Please Register/Activate
16685 - Cylinder 1 Misfire Detected
P0301 - 008 - Implausible Signal
16688 - Shareware Version. To Decode all DTCs
P0304 - 008 - Please Register/Activate
16687 - Shareware Version. To Decode all DTCs
P0303 - 008 - Please Register/Activate
16502 - Engine Coolant Temp. Sensor (G62): Signal too High
P0118 - 002 - Lower Limit Exceeded - Intermittent
16486 - Shareware Version. To Decode all DTCs
P0102 - 002 - Please Register/Activate - Intermittent
16690 - Shareware Version. To Decode all DTCs
P0306 - 008 - Please Register/Activate
16689 - Cylinder 5 Misfire Detected
P0305 - 002 - Lower Limit ExceededI know the misfires are in relation to my crankcase breather hose being fubar'd and I think the others are a bad relay.
either way car still drives and I dont have another. My inspection expired a while ago and I no longer park on private property this will help me out alot!
RE: DTC remover that works with ME7.1.1 8E0909559e - rodrigohobby - 08-27-2021
Hello Good morning I need to clear an error 0562 - Oil level sensor short to the positive of an ME 7.5, would you do it?