+- ECU WORKER - Automotive Tuning (https://ecuworker.com)
+-- Forum: ECU WORKER FORUM (https://ecuworker.com/forumdisplay.php?fid=1)
+--- Forum: Automotive Help & Discussions (https://ecuworker.com/forumdisplay.php?fid=4)
+---- Forum: Volvo Discussion (https://ecuworker.com/forumdisplay.php?fid=27)
+---- Thread: Volvo PTT Error: Unknown Chassis Series (/showthread.php?tid=352)
Volvo PTT Error: Unknown Chassis Series - mimehboob - 07-21-2018
Dear All Members,
I am facing an issue when connecting Volvo PTT 2.5.86 with Volvo FMX Series Trucks.
When we connect Tool with Truck, the software stated "Starting up a new work session" and began loading.
The status bar started moving and stated "Product Data: Reading Control Unit Data"
The status bar then remained stuck on the same stage for a few minutes.
In the end , an error was displayed stating "Unknow Chassis Series" and the process stopped.
I'll be thankful if any member can help me on this possible issue.
Thanks and regards,
Imran
RE: Volvo PTT Error: Unknown Chassis Series - Diagnostix - 07-21-2018
@mimehboob
Hi. Please take the time to read the forum rules and first make your introduction to the forum before posting. Thanks.
RE: Volvo PTT Error: Unknown Chassis Series - WEBMASTER - 07-23-2018
When you see that nexiq is connected, dont press connect, wait for 2-4 minutes, green bar gonna start loading by itself. Then you must be connected to internet so it wouldnt throw unknow chassis.