• 3 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
STICKY: Chip Tuning Tools [OFFICIAL]
#1
Hello! We are ECUTools - an online shop specialising in licensed professional chip tuning and diagnostics tools. We sell only original tools by the leading manufacturers of chip tuning and diagnostics solutions.

The most popular items are:

- Openport 2.0
Tuning tool hardware that is capable of communicating with a most OBDII compliant vehicles using a standard J2534 interface. Combined with EcuFlash software, the OpenPort 2.0 is capable of reflashing a large number of newer Subaru and Mitsubishi vehicles.

- Toyota Lexus ECU Flasher
A multipurpose programmer for Denso and Fujitsu Ten ECUs with NEC processors installed in TOYOTA, LEXUS and SCION vehicles with petrol and diesel engines through JTAG interface. It is a unique solution in the chip tuning world. Now also writing through OBD-II via CAN-bus is available.

- PCM
The PCM Flash is an integrated software solution intended for engine and automatic transmission ECUs of Volkswagen, Skoda, Ford, Mazda, Nissan, Subaru, Mitsubishi, Renault, Honda and Toyota vehicles.

- ММС
MMC Flasher is a multi-purpose loader intended for Hyundai, Kia, Mitsubishi, Subaru, Mazda, Ford, Nissan, Infiniti, Honda chip-tuning

- BitEdit
BitEdit is a modern software for editing automative ECU calibrations and allows to change most dynamic options of the engine. The software works in the following way: you open an ECU flash file, it proceeds with identification and then it shows a list of calibrations that can be edited. BitEdit editor is good for professionals and newbie tuners.

- BitBox
BitBox is an emerging software package that allows identification, reading and writing internal flash memory of control units for various purposes. The tools work with the ECU via the CAN or K-line data interfaces using any J2534 Pass-thru adapter. It supports a number of ECUs, including those in Korean vehicles, and extreme vehicles with Rotax engines.

- Combiloader
CombiLoader is a software and hardware system for reading and writing flash and EEPROM in the ECUs installed in various vehicles including Transtron Isuzu, Delphi MT92 (Great Wall), Valeo V46 and Delphi DCM3.7. It provides writing of the map area without dismantling an ECU from the vehicle by means of the diagnostic writing method for all the ECUs when possible.

We accept payment via PayPal and Western Union and ship all over the world by EMS and DHL.

We are ready to answer all your questions. Contact us via email or PM.
  Reply
#2
◈ PRE-ORDER License 47 - LADA/RENAULT/DACIA_KEY_BCM_CONTINENTAL_OBDII ◈

The module allows working with BCM Continental via OBD or on the bench.

Available functions:
☆ BCM identification; Error codes reading/erasing;
☆ Flash memory reading/writing (without the loading area);
☆ Vin change; BCM virginizing;
☆ PINCODE reading (necessary to write keys into BCM),
☆ ISK code reading, transponder password reading;
☆ BCM training (virgin unit pairing);
☆ ECM training (new engine ECU);
☆ Key programming, even if lost.

Pin code reading takes ~1 minute depending on the J2534 device.

Supported J2534 devices:

DrewTech Mongoose
DrewTech CarDAQ
Scanmatik 2 PRO
SMS — DiaLink
Chipsoft J2534 Lite (with disabled OpenPort2 support)
Chipsoft J2534 Mid (with disabled OpenPort2 support)
Chipsoft J2534 Pro (with disabled OpenPort2 support)

► Openport 2.0 is NOT supported!

Suggested car list:
► LADA VESTA 2015 +
► Renault Logan 2012 +
► Renault Duster 2012 +
► Renault Dokker 2012 +
► Renault Lodgy 2012 +
► Renault Symbol 2012 +
► Dacia Logan 2012 +
► Dacia Duster 2012 +
► Dacia Dokker 2012 +
► Dacia Lodgy 2012 +
► Dacia Symbol 2012 +

► The license will be available after 4.12.2020

For price and information please refer to the links below:
[Image: 79.gif] MD flasher
[Image: 79.gif] PRE-ORDER License 47 - LADA/RENAULT/DACIA_KEY_BCM_CONTINENTAL_OBDII
  Reply
#3
► Update: I/O TERMINAL MULTI TOOL V42

Full Reading and Writing:
◈ SIEMENS/ CONTINENTAL FORD EMS2101, EMS2102, EMS2103 (works with SIEMENS simcard).
◈ GM SIEMENS/ CONTINENTAL SIMTECT 77 (works with SIEMENS simcard).
◈ GM SIEMENS/ CONTINENTAL D42,D52,42R (works with SIEMENS simcard).
◈ FIAT IAW 7GF (works with MARELLI ECU license).

☆☆ Released new license for VOLVO P3 platform CEM modules (possible activate on VOLVO simcard)
☆ VOLVO DELPHI BCM M30882F+95320
M30882F DATA & PROGRAM FLASH R/W. EEPROM 95320 R/W.
☆ VOLVO DELPHI BCM (both versions of CEM hardware) R5F64524/R5F64525. R5F64524/R5F64525 DATA & PROGRAM FLASH R/W.
☆ Volvo CEM modules included in MULTITOOL software.

>> In order to R/W them, you need to know the PINCODE.

◈ ECU wiring diagrams document has also been updated.

I/O Terminal
  Reply
#4
► bFlash Update: V2011A - New OBD & Bench protocols!

☆Reading : 3-5 minutes
☆Writing: 2 minutes

NEW OBD PROTOCOLS

AUDI
Bosch MG1CS002IFX TC298
Bosch MG1CS008 TC298

BENTLEY
Bosch MG1CS008 TC298

BUICK
AcDelco E81 MPC5676
AcDelco E82 MPC5676
AcDelco T87 MPC5640 *

CHEVROLET
AcDelco E82 MPC5676
AcDelco E84 MPC5676
AcDelco E84 MPC5676
AcDelco E87 MPC5565
AcDelco E87 MPC5565
AcDelco T87 MPC5640 *

GMC
AcDelco E82 MPC5676
AcDelco T87 MPC5640 *

HOLDEN
AcDelco E82 MPC5676

LAMBORGHINI
Bosch MG1CS008 TC298

OPEL
AcDelco E84 MPC5676
AcDelco E87 MPC5565

PORSCHE
MG1CP007 TC298
MG1CS002IFX TC298
MG1CS008 TC298

NEW BENCH PROTOCOLS

BUICK
AcDelco E82 MPC5676

CADILLAC
AcDelco E81 MPC5676
AcDelco E82 MPC5676
AcDelco T87 MPC5640 *

CHEVROLET
AcDelco E82 MPC5676
AcDelco T87 MPC5640 *

GMC
AcDelco E82 MPC5676
AcDelco T87 MPC5640 *

HOLDEN
AcDelco E82 MPC5676

OPEL
AcDelco E84 MPC5676
AcDelco E87 MPC5565

* TCU protocols

For prices and more information please refer to the links below:

bFlash Master
bFlash Slave

CombiLoader Update

The update of the integrated modules and of the software

AMT VAZ (J2534): the software list expansion
Bosch ME17 China: the error when writing some ECUs has been fixed
Bosch MEDC17 VAG K/CANTP2.0: identification option without owning the module has been added
☆ Bosch MEDC17 VAG UDS: identification option without owning the module has been added
☆ Delphi MT05: language changing option has been added
☆ EMS3120 Renault: the state diagnostics has been improved
☆ SIMOS12 VAG: SIMOS12.2 is now supported
☆ SIMOS18 VAG: Checksum Corrections has been improved
☆ Siemens SIM2K-25x Hyundai/Kia: the support of client files forming has been added
☆ Siemens SIM2K-26x Hyundai/Kia: the support of client files forming has been added

For prices and more information please refer to the link below:

CombiLoader
  Reply
#5
◈ New Nissan Rogue supported by K-TAG in Boot mode ◈

☆ Reading and Writing the ECU Hitachi NEC029 SH72533, petrol engine 2.5 16v CVT

◈ Supported vehicle:
Nissan Rogue 2.5 16v CVT

For prices and more information please refer to the links below:

K-Tag Master
K-Tag Slave
  Reply
#6
FLEX version 5.7.0.0: New solutions in Bootloader for Continental ECUs ◈

Continental Simos 10.xx ECUs in VAG vehicles in Boot mode, including:
Volkswagen Polo 6R
Audi A1 8x
Seat Ibiza 6J
Volkswagen Jetta 1B

New solutions are also available in Bootloader for programming the Continental SID605 ECUs equipped on Faw Jiefang brand vehicles.

For the new protocols, bug fixes and general improvements please refer to the link

FLEX Master
FLEX Slave
  Reply
#7
BitBox BLACK FRIDAY!

 Get 25% off the BitBox and BitEdit modules!

From November 27th to 29th use the promo code bitboxbf2020 to get 25% off!

Please note that BitBox Slave and Credits ARE NOT affected by a discount and are sold at their USUAL price!

BitBox
BitEdit
  Reply
#8
ESS Winter Sale!

ESS modules with a discount! December 1st - 31st!

  Modules starting at 360 USD
  Full Activation 7660 USD

There is ✘ NO PROMO CODE, ✘ all the prices are listed with the discount already!

ESS
  Reply
#9
 Coming soon: BitBox 3.3.5 rev. 1

New modules:

BOSCH MG1/MD1 BENCH introduced. Module is in FINAL TEST STAGE.
FID 282: Bosch MG1/MD1 SPC/AURIX BENCH with reading/writing and checksums calculation.

◈ Fullflash reading with backup data, writing flash.
Supported MCUs: AURIX TC298, TC277, TC299, SPC5777.
EEPROM reading and recovery mode will be added ASAP.

The Module works only on the bench with Scanmatik 2 Pro devices ONLY, no other J2534 will be supported!

New families:

Ford Continental Diesel CAN new families:

◈ FID257 Ford Continental SID807EVO TC1797 with reading/writing and checksums calculation [FULL OBD]
◈ FID260 Ford Continental SID803 MPC561 + Ext.Flash with reading/writing and checksums calculation
◈ FID263 Ford Siemens SID802 C167 + Ext.Flash with reading/writing and checksums calculation
◈ FID262 Ford Siemens SID804 C167 + Ext.Flash with reading/writing and checksums calculation

Fixed and improvements:

◈ Delphi MT05 now merged into one family. FID2 now supports both ECU types with automatic detection
◈ SsangYong Delphi Diesel modules improved. Now DCM3.2 supports automatical recovery mode when ECU is damaged during writing.
◈ China Bosch M(E)7.9.71 improved writing with automatic detection security key.

BitBox
  Reply
#10
Exclusive FLEX version 5.8.0.0

Full Bench Solution for ZF 8HP, 7DCT300, 9G-Tronic, DSG and S-Tronic

On the bench
 Reading: 30 seconds
 Writing: 1 minute

For 1st and 2nd generation ZF 8HP mechatronics such as 8HP45, 8HP50, 8HP55, 8HP65, 8HP70, 8HP75, 8HP76, 8HP90, and 8HP95

Vehicle list:
◈ Alfa Romeo
◈ Alpina
◈ Audi vehicles
◈ BMW
◈ Chrysler
◈ Dodge
◈ Iveco
◈ Jaguar
◈ Jeep
◈ Land Rover
◈ Rolls Royce
◈ Skoda and many more.

A unique protocol is also available for programming the brand new BOSCH 9G-Tronic and GETRAG 7DCT300 automatic transmissions installed on:
◈ Mercedes
◈ Mini
◈ BMW
◈ Renault

Recalibration of DSG and S-Tronic BOSCH such as DQ500, DQ381, and DQ380 equipped with:
◈ Audi TT 2018 2.5 TFSI
◈ Volkswagen T-Roc 2017 2.0 TFSI
◈ Volkswagen Golf 1.5 TSI 2020

With the possibility of full access from the electronics connector.

Full vehicle list

FLEX Master
FLEX Slave
  Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Tuning Guides DimSport PDF EdgarasZ 8 7,577 04-21-2020, 04:22 PM
Last Post: EdgarasZ
EVC OFFICIAL EVC WINOLS Training! autotechremapping 0 1,237 04-08-2020, 12:42 AM
Last Post: autotechremapping

Forum Jump:


Users browsing this thread: 1 Guest(s)